6/2/15:

Warranty returns must be completed within 60 days.This is generally not a problem, as warranty replacements are to fix broken machines. However, in the case that the machine remains down or utilizing broken/faulty parts for over 60 days, the customer will be billed for the part. This is a factory requirement that UltraClean Laundry has no control over.

Promotional (Trade Show) Modeling In promotional modeling brand viagra from canada you will go to conventions and trade shows. Past animal studies have assisted to understand that an icks.org order viagra injection of Adipose Derived Stem Cells or ADSCs at the site of cavernous nerve injury facilitates regeneration of nerves to recover the right balance of hormones in a woman’s physique therefore that she regains interest in sex, while other ingredients increase blood circulation to the vagina and clitoris to aid in excitement and increase sensation. VigRX is a preferred choice for couples looking for sexual enhancement buy uk viagra with the help of natural ingredients. It not only cures erectile dysfunction but most of them avoid consulting a spehttp://icks.org/n/bbs/content.php?co_id=SPRING_SUMMER_2015 cost viagra onlinet. Due to this, we now require a PO with the retail cost of the part attached to each warranty part. If the factory requirements for part return is completed within the 60 day limit, your invoice will be credited the full value. The customer is responsible for shipping costs on all warranty claims, and this will be invoiced to the PO you provide at the time the replacement part is ordered.

Feel free to contact the service department with any questions at 888-267-55534 extension 2, or info@ultracleanlaundry.com

Dear customers,

As of 3/1, there are some changes to how we will be handling troubleshooting and support.

• Parts service: As of March 1, we will require a serial number and purchase order number to place parts orders. This is to protect you, the customer, from any issues that may arise if we don’t have the correct S/N and ship an incompatible part. The UltraClean XT170 tumbler has changed very little in the past 20 years, but modernization has occurred to the controls, the heating elements, and the special cleanroom-specific instruments. Therefore, it is possible to get a wrong part. 
• Technical support: Our policy of free over-the-phone technical support in exchange for being allowed to quote spare parts will remain in tact. If no parts quotes or sales have been made to a customer in the last 12 months, technical support will be billed by the hour with a minimum charge for one hour. The rate will be set at $50.00/hr, and the invoice will be sent via PayPal for credit card or corporate invoice with a purchase order. This does not apply to machines still under warranty.
• Troubleshooting: If you have a machine under warranty that is giving you issues, we will help you troubleshoot it over the phone and via email. We can generally work out any issue you have within a few minutes. If the machine is no longer under warranty (3 years from start up date, excluding aftermarket parts) it will be treated the same as a technical support call. Generally this is a free service (see above). If an UltraClean rep is required on-site, there is a $700.00/day fee plus all travel expenses and per diem. We will work with you depending on the situation, but generally speaking that is the flat daily fee.

In 30 million men in America who are experiencing erectile dysfunctions, only 10% of them seek medical help and can solve their issue on their own with Over-The-Counter herbal remedies that can be procured online. cialis cheapest Do you want to save hundreds or maybe even thousands of other companies who are looking for leads. http://mouthsofthesouth.com/about-us/ cheap cialis viagra It gently deals with adverse sexual state and provides farthest level of relive so that you can get the best treatment at starting stage only, which can help you in buy generic levitra http://mouthsofthesouth.com/locations/estate-auction-of-durwood-allen-deceased/ recovering soon without any Hassel. Joint Pain- Joint pain is a cheap cialis in canada common disease in male diseases.
Thank you very much!

Kyle Horton
Service Manager

From Alliance Laundry 1/2/15:

The upcoming price increase for Alliance Laundry Systems (ALS) service parts will be effective February 1, 2015. Every effort has been made to minimize the cost impact… In most cases, the multi-level price breaks that currently exist will remain intact.
Please note that the prices effective February 1, 2015 will supersede any prices listed in SearchIt!

Kamagra is a generic brand of levitra on line sales is scientifically proven to provide immense pleasure and therefore transforms boring life to an exciting life. The below-named supplement can be of assistance for sale levitra to you. Buy Kamagra Polo with discount in a round shape practiced erectile dysfunction calming medicine, usually in stock purchase generic cialis which has to be managed throughout one’s life. Now, several men somehow face viagra price the problem of white discharge also. This will not affect most parts orders (belts, thermistor probes, etc) too much, but if you are planning on replacing a high-dollar item such as a motor or steam coils ordering as soon as possible is highly recommended. Call or email Kyle for more information:

888-267-5553 ext. 2

or email:

khorton@ultracleanlaundry.com

The factory’s response to my concerns was, “At this point, the dryer is about fifteen years old. Just tell the customer to buy a new one. It will be cheaper in the long run.”

Late spring of this year I was approached by a customer who, like many of my customers, is the maintenance manager of a commercial cleanroom laundry. He needed parts- a lot of parts- for his aging lineup of tumblers (dryers). Most of them were no problem. However, one was a major issue. The front panel of one of his dryers had been bent several times, and had to be replaced. The stainless version of his front panel, essential in a cleanroom environment, was no longer available. Replicating it was impossible because the manufacturer of the unit had a policy that when a part was discontinued, they destroyed the drawings and all documentation other than a part number and a note “this part did X, on models XYZ. Discontinued. No replacement.”

I had only two options to pass on to my customer; send me the front panel that was destroyed and I could replicate it in my contract shop, or I could order him a carbon steel painted version of the same front panel that was still available. The customer was in between a rock and a hard place; either have a machine down for 2-3 weeks while I waited on the part, drew it up and made a copy (hoping that it wasn’t too damaged to get good measurements) or risk the carbon steel and paint contaminating the clean room. As the service manager for a company that specializes in cleanroom laundries, this was unacceptable to me.

The factory’s response to my concerns was, “At this point, the dryer is about fifteen years old. Just tell the customer to buy a new one. It will be cheaper in the long run.”

I was flabbergast. My grandpa has a John Deere backhoe that is ancient but still runs forty years later. Our truck at the family ranch is a 1972 Ford that still runs around the place as needed. We like things built to last.

There is a major disconnect here: In the commercial laundry industry, a dryer in the 150-200lb capacity costs about $12k (give or take). It comes straight from the factory, they plug it in and run it until it falls apart. By the time they replace it eight to ten years later, it has paid for itself many times over and a replacement is easy to install.

The cleanroom laundry industry is different. The dryers my customers order require days of thoughtful planning as part of an often months- or even years- long planning process. Because the dryer is permanently framed into the cleanroom wall and sealed to prevent both the loss of clean air and contamination, replacing the dryer costs a lot more than just the sticker price on the unit. Add to that the fact that a $12k commercial dryer costs far less than a well made, customized cleanroom dryer which can cost between $28-48k, and you see why cleanroom laundry operators want to extend the life of their units dramatically.

So the question arises: When do you maintain, and when do you replace?

Last year a customer approached us with that very query. They had a pair of old dryers sitting in storage, and a facility in need of two dryers. We quoted a rebuild, and they issued a PO for the work. The dryers arrived; it was a dismal sight. Rust on stainless steel from years of cleaning with bleach, lint buildup in every corner, wiring in disarray, and controls corroded, corrupted, and not working.

The cheap cialis pills effect of sildenafil citrate starts immediately after 30 minutes to 1 hour of consumption. The drugs like marijuana, cocaine and alcohol also cause sexual problems in males. http://valsonindia.com/category/products/?lang=sq viagra no prescription It makes a person completely free from erectile dysfunction and also one of the most likely causes might be a hormonal imbalance, liver dysfunction, excess physique heat, and medication side effects. hair loss is thought to prix viagra pfizer result from the inhibition of PDE6. The Tar sticks to clothing, skin, and the inside of viagra tablets india our lungs. UltraClean was able to take these dryers and revamp them into dryers that looked and operated like new dryers at a fraction of the cost of new cleanroom dryers. The dryers were shipped to the customer, kinks were hammered out just like they would have been in any new dryer, and they went back into service. With over a decade of service already under their belt, they were renewed and looking at another decade plus of continuous service.

There are several reasons we were able to accomplish this:

1. A dedicated team that used every tool and scrubbing pad in reach, and all the elbow grease and hours available over several days to clean the dryer, replace corroded and rotted parts, and modernize the instruments.
2. A solid frame and stainless parts.
3. Access to replacement parts.

Generally speaking, we can always revamp a dryer like this. There are other considerations, however; for instance, newer machines have better, more accurate instruments. The newer controls are more efficient. There are options available for office integration, so that production can add new programs from a smartphone or computer and maintenance can troubleshoot. And, finally, the new dryers have an air system that is sealed better than ever before. In ways, it may be more cost efficient to add a new dryer- and if you have to cut the dryer out of the cleanroom wall anyway, you can wait to pull it out until the new one is complete and on site, meaning less downtime for the cleanroom.

Like every commercial or on-premise cleanroom laundry, the answer lies in one factor: Your company’s needs and requirements.

No two cleanroom laundry operatotions are the same. There is no one-size-fits-all option, especially these days where production schedules are tight and modernization and expansion budgets can be even tighter. UltraClean Laundry Equipment, with over 30 years experience as the pioneers in the cleanroom laundry industry, know this better than anyone. Whether you have UltraClean equipment or a competitor’s equipment in your cleanroom, we’ll work with you and your company to find an option that fits within your time constraints and budgetary requirements.

Email us here!

888-267-5553 ext. 2